Chevrolet Eagle

Chevrolet Eagle and Master
Overview
Manufacturer	Chevrolet (General Motors)
Also called	Eagle and Master Series CA / Mercury or Standard Series CC
Production	450,435 (Eagle and Master) 35,845 (Mercury or Standard)
Model years	1933
Assembly	Oakland Assembly, Oakland, California North Tarrytown Assembly, Tarrytown, New York Flint Assembly, Flint, Michigan Norwood Assembly, Norwood, Ohio St. Louis Assembly, St. Louis, Missouri Oshawa Assembly, Oshawa, Ontario Canada Osaka Assembly, Osaka, Japan General Motors South Africa, Port Elizabeth, South Africa GM Argentina, Buenos Aires, Argentina GM Belgium, Antwerp, Belgium
Body and chassis
Layout	FR layout
Platform	GM A platform
Related	Chevrolet Mercury Chevrolet Suburban
Powertrain
Engine	206 cu in (3.4 L) 6-cylinder
Dimensions
Wheelbase	110 in (2,794.0 mm)
Curb weight	2,675–2,880 lb (1,213–1,306 kg)
Chronology
Predecessor	Chevrolet Series BA Confederate
Successor	Chevrolet Master and Standard

The Chevrolet Eagle (Series CA) is an American vehicle manufactured by Chevrolet in 1933 to replace the 1932 Series BA Confederate. The Eagle was produced early in the 1933 production year. When it was joined by the cheaper Mercury later in 1933 the Eagle name was changed to Master to provide Chevrolet with a two-car range, and the first time in ten years they manufactured two models on different wheelbases. The Mercury was also known as the Standard series. ^[1]

Total the earlier Eagle and later Master combined sold 450,435, an increase of nearly 140,000 the previous year's Series BA sales of 313,395, and ensured that Chevrolet was able to retain their number one spot in American car sales. The Eagle saw the end of two-seater cars from Chevrolet, and the new Town Sedan included an integral trunk.

There are several differences between the Eagle and Master. The easiest to identify is the post between the front door wing windows and the roll down windows. On the Eagle the chrome divider between these two windows goes down as the window goes down, where as on the Master this divider remains fixed and does not go down with the window.

Specification

The Eagle and Master's wheelbase increased an inch to 110 in (2,794.0 mm) compared to the Series BA, and was three inches longer than the new Mercury.

It was powered by a larger version of the "Stovebolt Six", 206 cu in (3,380 cc) six-cylinder engine, producing 65 hp (48 kW).^[2] A smaller 181 cu in (2,970 cc) six-cylinder was used in the Mercury, producing 60 hp (45 kW)

Trucks

1933 Chevrolet trucks at Yellowstone

GM also used the Eagle chassis and platform for trucks branded as both Chevrolet and GMC.

References

GM Heritage Center 1933 Chevrolet Passenger car and Truck specifications

Wikimedia Commons has media related to 1933 Chevrolet automobiles.

Wikimedia Commons has media related to Chevrolet trucks.

Wikimedia Commons has media related to GMC trucks.