Chain transfer

Chain transfer is a polymerization reaction by which the activity of a growing polymer chain is transferred to another molecule.[1][2]

P• + XR' → PX + R'•

Chain transfer reactions reduce the average molecular weight of the final polymer. Chain transfer can be either introduced deliberately into a polymerization (by use of a chain transfer agent) or it may be an unavoidable side-reaction with various components of the polymerization. Chain transfer reactions occur in most forms of addition polymerization including radical polymerization, ring-opening polymerization, coordination polymerization, and cationic as well as anionic addition polymerization.

IUPAC definitions

Chain transfer (in a chain polymerization): Chemical reaction occurring
during a chain polymerization in which an active center is transferred
from a growing macromolecule or oligomer molecule to another molecule
or to another site on the same molecule.[3]

Chain-transfer agent: Substance able to react with a chain carrier by a
reaction in which the original chain carrier is deactivated and a new chain
carrier is generated.[4]

Chain transfer reactions are usually categorized by the nature of the molecule that reacts with the growing chain.

Historical Development

Chain transfer was first proposed by Taylor and Jones in 1930.[5] They were studying the production of polyethylene [(C
2
H
4
)n] from ethylene [C
2
H
4
] and hydrogen [H
2
] in the presence of ethyl radicals that had been generated by the thermal decomposition of (Et)2Hg and (Et)4Pb. The observed product mixture could be best explained by postulating "transfer" of radical character from one reactant to another.

Flory incorporated the radical transfer concept in his mathematical treatment of vinyl polymerization in 1937.[6] He coined the term "chain transfer" to explain observations that, during polymerization, average polymer chain lengths were usually lower than predicted by rate considerations alone.

The first widespread use of chain transfer agents came during World War II in the US Rubber Reserve Company. The "Mutual" recipe for styrene-butadiene rubber was based on the Buna-S recipe, developed by I. G. Farben in the 1930s. The Buna-S recipe, however, produced a very tough, high molecular weight rubber that required heat processing to break it down and make it processable on standard rubber mills. Researchers at Standard Oil Development Company and the U. S. Rubber Company discovered that addition of a mercaptan modifier to the recipe not only produced a lower molecular weight and more tractable rubber, but it also increased the polymerization rate.[7] Use of a mercaptan modifier became standard in the Mutual recipe.

Interestingly, although German scientists had become familiar with the actions of chain transfer agents in the 1930s,[8] Germany continued to make unmodified rubber to the end of the war and did not fully exploit their knowledge.

Throughout the 1940s and 1950s, progress was made in the understanding of the chain transfer reaction and the behavior of chain transfer agents. Snyder et al. proved the sulfur from a mercaptan modifier did indeed become incorporated into a polymer chain under the conditions of bulk or emulsion polymerization.[9] A series of papers from Mayo (at the U.S. Rubber Co.) laid the foundation for determining the rates of chain transfer reactions.[10][11][12]

In the early 1950s, workers at DuPont conclusively demonstrated that short and long branching in polyethylene was due to two different mechanisms of chain transfer to polymer.[13] Around the same time, the presence of chain transfer in cationic polymerizations was firmly established.[14]

Current Activity

The nature of chain transfer reactions is currently well understood and is given in standard polymerization textbooks. Since the 1980s, however, a particularly active area of research has been in the various forms of free radical living polymerizations including catalytic chain transfer polymerization, RAFT, and iodine transfer polymerization. In these processes, the chain transfer reaction produces a polymer chain with similar chain transfer activity to the original chain transfer agent. Therefore there is no net loss of chain transfer activity.

Notes

  1. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006) "chain transfer".
  2. Flory, P. J. Principles of Polymer Chemistry, Cornell University Press, Ithaca, NY, 1953, p. 136. ISBN 0-8014-0134-8
  3. "Terminology for reversible-deactivation radical polymerization previously called "controlled" radical or "living" radical polymerization (IUPAC Recommendations 2010)" (PDF). Pure and Applied Chemistry. 82 (2): 483–491. 2010. doi:10.1351/PAC-REP-08-04-03.
  4. "Terminology for reversible-deactivation radical polymerization previously called "controlled" radical or "living" radical polymerization (IUPAC Recommendations 2010)" (PDF). Pure and Applied Chemistry. 82 (2): 483–491. 2010. doi:10.1351/PAC-REP-08-04-03.
  5. Taylor, Hugh S.; William H. Jones (March 1930). "The thermal decompositionof metal alkyls in hydrogen-ethylene mixtures". J. Am. Chem. Soc. 52 (3): 1111–1121. doi:10.1021/ja01366a044.
  6. Flory, Paul J. (February 1937). "The Mechanism of Vinyl Polymerizations". J. Am. Chem. Soc. (59): 241–253. doi:10.1021/ja01281a007.
  7. Synthetic Rubber, Whitby, G. S., ed., John Wiley, NY 1954, p. 243.
  8. For example, Meisenburg, K.; Dennstedt, I.; Zaucker, E. US Pat. 2,321,693 (assigned to I. G. Farben).
  9. Snyder, H. R.; John M. Stewart; R. E. Allen; R. J. Dearborn (1946). "The Mechanism of Modifier Action in the GR-S Polymerization.". Journal of the American Chemical Society. 68 (8): 1422. doi:10.1021/ja01212a007.
  10. Mayo, F. R. J. Amer. Chem. Soc., 1943, 65, 2324.
  11. Gregg, R. A.; Mayo, F. R. J. Amer. Chem. Soc., 1948, 70, 2372.
  12. Mayo, F. R.; Gregg, R. A.; Matheson, M. S. J. Amer. Chem. Soc., 1951, 73, 1691.
  13. see Roedel, M. J. J. Amer. Chem. Soc., 1953, 75, 6110 and following papers.
  14. Overberger, C. G.; G. F. Endres (April 1955). "Ionic polymerization. VI. The mechanism of molecular termination by aromatic compounds in cationic polymerization of sytrene". Journal of Polymer Science. 16 (82): 283–298. doi:10.1002/pol.1955.120168218.
This article is issued from Wikipedia - version of the 3/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.