Breastwork monitor

This article is about the breastwork monitors built for the Royal Navy in the 1860s. For other warships referred to as 'breastwork monitors', see Monitor (warship).
Stern view of HMVS Cerberus at Williamstown, Victoria, Australia, in 1871. Note the low freeboard.

A breastwork monitor was a type of ship originated by Sir Edward Reed, the Chief Constructor of the Royal Navy between 1863 and 1870. The term "monitor" was directly derived from the American ship of that name, USS Monitor designed by John Ericsson which served in the American Civil War. The American ships were very stable, and difficult to damage by gunfire, because of their very low freeboard. This, however, caused them to behave, some said, as a "half-tide rock", with the ever present risk of being swamped in a sea should water gain access to the interior through hatches, turret bases or other openings in the deck.

Reed proposed to overcome this risk by the addition of an armoured breastwork. This was an armoured superstructure of moderate height (7 feet (2.1 m) in HMVS Cerberus), centrally placed on the ship and containing within its armoured circumference the gun turrets, bridge, funnels and all other upper deck appurtenances needed to operate the ship. The presence of this breastwork allowed the ship to operate without fear of being flooded by waves breaking over the deck, and allowed the main armament to be positioned at a greater height than in the American monitors, gaining thereby greater command and range, while preserving the defensive advantage of low freeboard.

Reed's concept was copied by other designers and breastwork monitors served in the French and Imperial Russian Navies, among others.

See also

External links

This article is issued from Wikipedia - version of the 4/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.