This animation shows the movement of a double leaf bascule.
|Ancestor||Drawbridge, Plate girder bridge, cantilever bridge|
|Related||Lift bridge, swing bridge|
|Carries||Pedestrian, automobile, truck, light rail, heavy rail|
|Falsework required||Site and prefabrication specific|
A bascule bridge (sometimes referred to as a drawbridge) is a moveable bridge with a counterweight that continuously balances a span, or "leaf", throughout its upward swing to provide clearance for boat traffic. It may be single or double leafed.
The name comes from the French term for balance scale, which employs the same principle. Bascule bridges are the most common type of movable span because they open quickly and require relatively little energy to operate, while providing the possibility for unlimited vertical clearance for marine traffic.
Bascule bridges have been in use since ancient times. However, it was not until the adoption of steam power in the 1850s that very long, heavy spans could be moved quickly enough for practical application.
There are three types of bascule bridge designs, and counterweights required to balance a bascule's span may be located either above or below the bridge deck.
The fixed-trunnion (sometimes a "Chicago" bascule) rotates around a large axle that raises the span(s). The Chicago bascule name derives from the location where it is widely used, and is a refinement by Joseph Strauss of the fixed-trunnion.
The rolling lift trunnion (sometimes a "Scherzer" rolling lift), raises the span by rolling on a track resembling a rocking chair base. The "Scherzer" rolling lift is a refinement patented in 1893 by the American engineer William Donald Scherzer.
The rarer Rall type combines rolling lift with longitudinal motion on trunnions when opening. It was patented (1901) by Theodor Rall. One of the few surviving examples is the Broadway Bridge (1913), in Portland, Oregon.
Tower Bridge in London
Mystic River Bascule Bridge, Mystic, Connecticut
Rolling lift Pegasus Bridge over the Caen Canal, Normandy, France
Railway Rolling lift bridge in Oldenburg, Germany
Single-leaf through truss with overhead counterweight, Seattle, Washington
The Ashtabula lift bridge, a Strauss bascule built in Ohio in 1925
The Patagones-Viedma Railway Bridge, Argentina. The longest rolling bridge in the world and the only with hydraulic counterweight.
The Birkenhead Bridge in Port Adelaide, Australia, fully opened
The Strauss design Johnson Street Bridge across Victoria Harbour, British Columbia, built in 1924
Bascule bridge in Montceau-les-Mines, France
Wabash Avenue Bridge in Chicago, Illinois, honored for its elegance by the American Institute of Steel Construction in 1930
Pamban Bridge in Rameswaram, India, over the Palk Strait
White Cart Bridge, Renfrew, Scotland
Cherry Street Strauss Trunnion Bascule Bridge at Toronto Harbour Shipping Channel, Toronto
The old Johnson Street Bridge in Victoria, British Columbia, Canada
- List of bascule bridges
- Moveable bridges for a list of other movable bridge types
|Wikimedia Commons has media related to Bascule bridges.|
- ↑ Koglin, Terry L. (2003). "4. Bascule Bridges". Movable bridge engineering. John Wiley and Sons. ISBN 978-0-471-41960-0. Retrieved May 25, 2009.
- 1 2 "Landmark Designation Report: Historic Chicago Bridges" (PDF). Commission on Chicago Landmarks. September 2007 [September 2006]. pp. 12, 15 (pdf pages 14, 17). Retrieved April 21, 2013.
- ↑ US grant 511713, Scherzer, William, "Lift-Bridge", issued 26 December 1893
- 1 2 3 Wood Wortman, Sharon; Wortman, Ed (2006). The Portland Bridge Book (3rd Edition). Urban Adventure Press. pp. 32, 35. ISBN 0-9787365-1-6.
- ↑ "Patent number 669348: T. Rall movable bridge". United States Patent and Trademark Office (referenced online by Google Patents). 1901. Retrieved April 21, 2013.
- ↑ Historic American Engineering Record. "Broadway Bridge, Spanning Willamette River at Broadway Street [sic], Portland, Multnomah County, OR". Library of Congress. Retrieved April 21, 2013.