Artificial leather

"Pleather" redirects here. For the Toadies album, see Pleather (album).
Steps to make synthetic PU leather: 1 = cotton fabric, 2 = coagulation (wet process) onto fabric with aromatic polyurethane in DMF, 3 + 4 = transfer of coating + finish with solvent-borne or water-borne polyurethane formulation

Alternative leather (bicast leather) is a fabric or finish intended to substitute for leather in fields such as upholstery, clothing, footwear and fabrics, and other uses where a leather-like finish is required but the actual material is cost-prohibitive, unsuitable, or unusable for ethical reasons.

Production of synthetic, artificial/faux "leathers" has recently evolved so that a shell coating layer goes on top of a synthetic polymer blend, so the definition of "synthetic", "artificial/faux" leather methods of production no longer necessarily requires composite leather blends of [coated] raw-tanned cowhide grains and/or its fibrous layers.

Clothing and fabric uses

Artificial leather cover for mobile phones.

Synthetic leathers, at times made from plastics, are often used in clothing and fabrics. Artificial leather is marketed under many names, including "leatherette", "faux leather", "vegan leather", "PU leather" and "pleather".[1]

Types

Poromeric imitation leather

Sometimes referred to as poromerics, poromeric imitation leathers are a group of synthetic "breathable" leather substitutes made from a plastic coating (usually a polyurethane) on a fibrous base layer (typically a polyester).

The term poromeric was coined by DuPont as a derivative of the terms microporous and polymeric.

Corfam

The first poromeric material was DuPont's ill-fated Corfam introduced in 1963 at the Chicago Shoe Show.

Corfam was the centerpiece of the DuPont pavilion at the 1964 New York World's Fair in New York City. Its major advantages over natural leather were its durability and its high gloss finish that could be easily cleaned with a damp cloth. Its disadvantages were its stiffness which did not lessen with wearing, its relative lack of breathability, and easy confusion with non-breathable cheaper products. DuPont manufactured Corfam at its plant in Old Hickory, Tennessee, from 1964 to 1971. After spending millions of dollars marketing the product to shoe manufacturers, DuPont withdrew Corfam from the market in 1971 and sold the rights to a company in Poland.

Corfam is still used today in some products, an example being certain types of equestrian saddle girth. Corfam shoes are still popular in uniformed professions where shiny shoes are desirable.

Leatherette

Leatherette is a form of artificial leather, usually made by covering a fabric base with plastic. The fabric can be made of a natural or a synthetic fibre which is then covered with a soft PVC layer.

Leatherette bound books and 20th century cameras are good examples of leatherette. Leatherette clothing of various kinds (including lingerie) also exist.

A disadvantage of plastic "leatherette" is that it is not porous and does not allow air to pass through it; thus, sweat can accumulate if it is used for clothing, car seat coverings, etc. One of its primary advantages, especially in cars, is that it requires little maintenance in comparison to leather, and does not crack or fade easily.

Brand names

Vegetable-based alternatives

See also

References

  1. Claire Shaeffer (10 November 2003). Sew Any Fabric: A Quick Reference to Fabrics from A to Z. Krause Publications Craft. p. 37. ISBN 1-4402-2033-6.
  2. The Lorica "concept": Lorica Sud
Wikimedia Commons has media related to Artificial leather.
This article is issued from Wikipedia - version of the 11/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.