Area code 202

Area codes 571 and 703 Area codes 240 and 301
The area colored red indicates the geographical region of the District of Columbia, served by area code 202

Area code 202 is the North American telephone area code for Washington, D.C.. The area code was one of the original area codes established in October 1947 by AT&T in the North American Numbering Plan (NANP).

After the State of New Jersey with area code 201, the District of Columbia was the second Numbering Plan Area (NPA). NPAs that covered an entire administrative region received a code in which the second digit was '0'.[1]

As of 2012, no plans exist to overlay the 202 area code, as NANPA estimates the current supply of numbers is sufficient at least to the year 2019.[2] Washington is thus one of the largest cities where seven-digit dialing is still possible. However, calls are connected if the area code is dialed. There is no provision for long-distance calls within the area code.[3]

From 1947 to 1990, area code 202 was an unpublished alternate area code for the nearby suburbs in Maryland and Virginia, which were officially in area codes 301 and 703, respectively. This was possible because the entire Washington metropolitan area is a single LATA. Every number on the Maryland and Virginia sides of the Washington metropolitan area was given a non-published alternate number in 202. This arrangement allowed local calls throughout the metropolitan area to be dialed using only seven digits. Also, for example, a telephone number in Kensington, Maryland, that was officially 301-949-xxxx could be dialed as 202-949-xxxx. However, on October 1, 1990, due to pending number exhaustion, the ability to dial the suburbs using area code 202 ended. There is no exchange code protection and local calls between area codes require 10-digit dialing (area code and number, leading 1 is not required and is usually not allowed). Continued growth required the 703/540 split in Virginia, the overlaying of 703 with 571 in Virginia, and the 301/410 split in Maryland.

Telephone numbers for offices in the United States Congress begin with 202-224, 202-225, 202-226, or 202-228.

See also

References

  1. ↑ AT&T, Notes on Nationwide Dialing (1955)
  2. ↑ 2011 NRUF and NPA Exhaust Analysis
  3. ↑ NANPA Administration System: Area Code 202 Archived January 29, 2009, at the Wayback Machine.

External links

District of Columbia area codes: 202
North: 240/301
West: 571/703 area code 202 East: 240/301
South: 571/703
Maryland area codes: 240/301, 410/443/667
Virginia area codes: 276, 434, 540, 571, 703, 757, 804

Coordinates: 38°54′N 77°2′W / 38.900°N 77.033°W / 38.900; -77.033

This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.