All-purpose Lightweight Individual Carrying Equipment

First generation LINCLOE LCE components circa 1968–1969
Second generation LINCLOE LCE components circa 1970–1971
LINCLOE LCE/ALICE components circa December 1972
ALICE components circa 1973
US Army infantryman wearing ALICE circa 1973
US Army infantryman wearing ALICE circa 1973
LC-2 Individual Equipment Belt
LC-1 Entrenching Tool Carrier
LC-1 Field First Aid Dressing Case
LC-1 Small Arms Ammunition Case
LC-2 Water Canteen Cover
LC-1 Individual Equipment Belt Suspenders
LC-1 Field Pack - medium
LC-1 Field Pack - large
LC-1 Field Pack Frame
LC-1 Cargo Support Shelf

The ALICE (All-Purpose Lightweight Individual Carrying Equipment) load bearing system, was adopted as United States Army Standard A on 17 January 1973[1] to replace the M-1956 Load-Carrying Equipment (LCE) and M-1967 Modernized Load-Carrying Equipment (MLCE). Although since superseded by MOLLE, ALICE gear is still in some limited use in the US Army in National Guard and training units, as well as by Navy and Air Force ground units. The US Marine Corps currently uses ALICE gear in training only.

History and development

The All-Purpose Lightweight Individual Carrying Equipment is the end result of the LINCLOE (Lightweight Individual Clothing And Equipment) program that began in 1965 and terminated with the adoption of the ALICE system on 17 January 1973. The goal of the individual equipment portion of the LINCLOE program was to develop a lightweight load-carrying system in an effort to lighten a combat soldier's overall load.

1965–1967

Based principally on the conclusions and recommendations of A Study To Reduce The Load Of The Infantry Combat Soldier, 1962[2] and A Study To Conserve Energy Of The Combat Infantryman, 1964,[3] the army established a Quantitative Material Requirement[4] (QMR) in 1965 calling for the development of LINCLOE.

Although the development of the LINCLOE load-carrying equipment did not officially start until after the United States Army Materiel Command Technical Committee (AMCTC) approved the project 27 April 1966, development of lightweight load-carrying equipment really began in 1961 with the development of the Lightweight Rucksack (FSN 8465-782-3248) made of nylon fabrics and an aluminum frame which weighed 3 pounds (1.4 kg) as compared to the 7.5 pounds (3.4 kg) cotton canvas duck and steel item which it replaced.[5]

The development of this lightweight rucksack led to an informal inquiry by officers of the infantry community as to the possibility of reducing the weight of the M-1956 Load-Carrying Equipment (LCE). As a result of this interest, the army produced a set of LCE in 1962, substituting available nylon materials for the cotton canvas duck. This set of nylon load-carrying equipment weighed slightly more than 3 pounds (1.4 kg) as opposed to 5 pounds (2.3 kg) for the cotton canvas duck items. These two items, the lightweight rucksack and the set of nylon LCE, formed the basis for that portion of the LINCLOE Quantitative Material Requirement dealing with load-carrying equipment. Annex A to the Quantitative Material Requirement set a goal of 3.3 pounds (1.5 kg) for the individual load-carrying equipment and 3 pounds (1.4 kg) for the rucksack. Officials decided that the design of the new load-carrying equipment would follow that of the standard load-carrying equipment with material changes from cotton canvas duck to nylon duck and replacement of the brass and steel hardware with aluminum or plastic items.

The design effort went slowly, due to the concentration on the design and development of items to meet the requirement of the Vietnam War, although developers initiated projects investigating the feasibility of replacing much of the steel and brass hardware with aluminum or plastic items. On 15 March 1967, an Engineering Concept Review was held at Natick Laboratories.[6] The concept approved at the meeting was for an individual equipment belt to be supported by individual equipment suspenders, to which could be attached component items such as small arms ammunition cases, water canteen covers, entrenching tool carriers, field first aid dressing cases, etc. A field pack somewhat larger than the M-1961 cotton canvas duck field pack was proposed which could be attached for carrying either on the individual equipment belt at the small of the back, or on the shoulders attached to the individual equipment belt suspenders, or attached to a detachable field pack frame. The field pack frame with shoulder straps and a removable cargo shelf would be designed to be worn over the individual equipment belt and suspenders. The end result of this meeting was the adoption of the nylon M-1967 Modernized Load-Carrying Equipment (MLCE). The field pack design was rejected in the end and a nylon version of the M-1961 field pack was produced instead along with the nylon Tropical Rucksack (FSN 8465-935-6673).

1968–1969

Even after the adoption of the MLCE in 1967, developments continued under the LINCLOE program. The MLCE was envisioned for use strictly in tropical environments and the development of a standard load-carrying equipment system to replace all load-carrying equipment systems continued.

During 1968, the LINCLOE program continued to refine the lightweight load-carrying system. A prototype system was designed utilizing some of the existing MLCE components such as the water canteen cover, small arms ammunition cases, and field first aid dressing case. The individual equipment belt buckle was replaced with a plastic version of the Davis quick-release buckle and a new Vest, Combat was developed to replace the individual equipment belt suspenders. Teams developed both a small and large field pack utilizing the detachable field pack frame concept scrapped in 1967.

These prototype items were presented at a Design Characteristics Review And Prototype System Review held at Natick Laboratories 26 March 1968.[1] It was recommended that an Engineering/Service Test [ET/ST] be carried out on this new load-carrying system design with the understanding that any design changes required be accomplished prior to testing and without another design review.

In July 1969, test items presented at the 1968 Natick meeting and manufactured by the United States Army Support Center in Richmond, Virginia, under the supervision of Natick Laboratories personnel, were sent to the United States Army Infantry Board [USAIB], Fort Benning, Georgia; United States Army Tropical Test Center (USATTC), Fort Clayton, Panama Canal Zone; United States Army Arctic Test Center (USAATC), Fort Greely, Alaska; and the General Equipment Test Activity (GETA), Fort Lee, Virginia. Some of the test items differed significantly from those presented at the 1968 meeting. The major changes were as follows:[1]

Testing of this new load-carrying system, known as the LINCLOE Load-Carrying Equipment (LCE), began in July 1969 at Fort Benning; September 1969 at Fort Clayton; October 1969 at Fort Greely; and November 1969 at Fort Lee.[1]

On 19 July 1969, the Infantry Team (composed of the Commanding General, Fort Benning; Commanding General of the Infantry School; Commanding Officer of the Combat Developments Command Infantry Agency; and the Commanding Officer of the Infantry Board) met at Fort Benning to discuss improvement of infantry items of individual clothing and equipment.[7] They invited the LINCLOE LCE Project Officer from Natick Laboratories to attend this meeting and present the status of load-carrying equipment items. The Commanding General at Fort Benning was unaware of the effort underway to improve the load-carrying equipment as well as other items of individual clothing and equipment. As a result of the LINCLOE LCE Project Officer's attendance at this meeting, the group established a Non-commissioned Officers (NCO) Board to suggest improvements to load-carrying equipment items.[1]

The NCO Board reviewed the LINCLOE LCE under test as well as the MLCE being provided to troops in Vietnam and arrived at characteristics which they considered desirable. As testing of the LINCLOE LCE continued a number of failures began to occur mostly to do with closure devices; plastic snap fasteners were still being utilized like those initially utilized on MLCE items. By December 1969, all testing stopped for re-evaluation of the components of the new load-carrying system.

1970–1971

In January 1970, the Infantry Board completed the evaluation of the load-carrying equipment, and on 17 March 1970, they held a conference at Fort Benning to review the results of the evaluation. They discussed each item evaluated, and agreed as to the acceptable changes to each load-carrying equipment item. They also agreed that the test of the first-generation LINCLOE LCE should be stopped and new items be designed to reflect the characteristics developed as a result of the evaluations by the NCO Board and Infantry Team.

In a letter to United States Army Materiel Command dated 15 April 1970, United States Army Combat Developments Command described the next generation of LINCLOE LCE for service testing based on the agreements of the 17 March 1970 meeting.[8] The following items were recommended when modified as indicated:

Also proposed in the letter were improved versions of the small and large field pack and field pack frame.

During April and June 1970, teams fabricated a prototype system of load-carrying equipment as described in the 15 April 1970 letter. They presented this set of load-carrying equipment to the NCO Board and Infantry Team for review at Fort Benning on 18–19 June 1970. On 29 July 1970, representatives from the United States Army Combat Developments Command and the LINCLOE LCE Project Officer met at Natick Laboratories and drafted a revision of the LINCLOE LCE Quantitative Material Requirement as it pertained to load-carrying equipment including the characteristics for each individual item. This was based primarily on the outcome of the 17 March 1970 meeting with one major exception. The LINCLOE LCE Project Officer a third field pack to the system. This was the medium field pack with a bag made from the nylon tropical rucksack, modified to meet the NCO Board requirements for a small field pack by adapting it to be worn on the back with or without a field pack frame.

On 5 October 1970, a Design Characteristics Review And Prototype System Review was held at Natick Laboratories concerning the new LINCLOE LCE. The group approved Quantitative Material Requirement for the new second-generation LINCLOE LCE with minor changes.

Natick Laboratories fabricated fifteen sets of the second-generation LINCLOE LCE and shipped them to Army European Headquarters (USAREUR) 17 November 1970 for evaluation. In December 1970, the United States Army Support Center, Virginia fabricated an additional 300 sets of the second-generation LINCLOE LCE and sent them to Natick Laboratories for assembly and shipment to test sites.

In August 1971, the test sets were sent to Fort Benning, Fort Greely, Fort Devens, and, as requested, to the Marine Corps at Quantico. Pre-test inspections uncovered a number of deficiencies with the field packs which were returned to Natick Laboratories for modification. The modified items went back to the test sites in November 1971 and the service test began.

1972–1973

By March 1972, so many deficiencies and shortcomings had developed in the load-carrying equipment that the United States Army Test And Evaluation Command requested that the test at Fort Benning be suspended until test items could be repaired or replaced. Officials held a meeting at Fort Benning on 6 April 1972 to discuss the failures.[9] In their discussions, they agreed that Natick Laboratories would take action to correct the problems so the tests could resume 9 June 1972.

Most deficiencies were found in field packs, users asked that the inner flaps on the small arms ammunition cases be removed as they impeded the rapid removal of cartridge magazines. Developers replaced these with simple strips of nylon fabric to divide the cartridge magazines. At some point during 1971 the Marine Corps found that the small arms ammunition case with the divider flaps was acceptable and initiated acceptance procedures. On 31 January 1972, the army issued military specification MIL-C-28981(MC) and these small arms ammunition cases were type classified and assigned the Federal Stock Number 8465-464-2084. The Defense Support Agency (DSA) issued contracts for the item for fiscal year 1973.

Natick Laboratories completed the modifications of the test items and military aircraft transported them to Fort Benning 1 June 1972, but testing did not resume until 3 July 1972. Testing finished 18 August 1972 and the final report was received on 24 November 1972.[10] As a result of the test, the Infantry Board recommended that no further development effort be expended on the load-carrying equipment as a system. On 31 October 1972, representatives from Natick Laboratories visited Fort Benning to discuss the problems which appeared during the testing of each item and to arrive at a decision whether to continue development of each item.[11] Prior to these final meetings the LINCLOE LCE components had been type classified and assigned Federal Stock Numbers as follows:

The three field packs were also type classified and assigned Federal Stock Numbers:

After the final meetings, the group proposed the following changes prior to manufacture:

The group accepted the medium and large field packs with minor modifications but rejected the small field pack as unnecessary. Retesting of the modified medium and large field packs were conducted at Fort Benning during 27 November through 18 December 1972. The tests showed that the deficiencies and shortcomings of the field packs previously reported had been corrected.[12]

The formal Development Acceptance (DEVA) review on the LINCLOE LCE occurred at Natick Laboratories 17 January 1973.[13] The panel members agreed, by consensus, that the components be type classified as Standard A. After acceptance, the individual equipment system was given the designation M-1972 Lightweight Load-Carrying Equipment (LLCE). The Defense Support Agency (DSA) began issuing contracts for the components of the new individual equipment system for fiscal year 1974, which began 1 July 1973. After the DSA issued the initial contracts, the individual equipment system was re-designated All-Purpose Lightweight Individual Carrying Equipment (ALICE) and the use of year-model designations officially ceased.[14]

Current

The ALICE system has been phased out of all Active and Reserve Component (USAR and Army National Guard) units in the Army. Basic and Advanced Individual Training units, to include OCS, ROTC, and USMA, use the current MOLLE equipment in the digital Universal Camouflage Pattern (UCP). ALICE was succeeded by Generation I MOLLE equipment. MOLLE I was then replaced by MOLLE II which, unlike MOLLE I, is strictly for the Army's Army Combat Uniform (ACU) instead of the Battle Dress Uniform (BDU) and Desert Camouflage Uniform (DCU).

The Navy and USAF use ALICE gear for ground personnel as well, although the USAF is phasing out ALICE in favor of MOLLE.

The Marine Corps still issues the medium ALICE pack for some radio operators. Both it and the large variant can still be found with NROTC units (who train Marine officers in addition to Navy officers). Active-duty training units (Recruit Training, School of Infantry, Officer Candidates School, The Basic School) and deployable units have switched over to the new Family of Improved Load Bearing Equipment (USMC Pack) or the slightly older Improved Load Bearing Equipment (ILBE) system.

Small maneuver elements which rely on lightweight pack design and durability still use ALICE packs today.[15]

Iranian Military and Law Enforcement still make heavy use of ALICE, MLC and LCE gear, but they are switching to MOLLE equipment (specifically IRGC and Army special forces) because of being more modular and to IIFS for being more lightweight.

Fighting and existence loads

The ALICE system retains the concept of separate fighting and existence loads that was refined in the mid-1950s during the development of the LCE. The most important point in the fighting and existence loads concept is that an infantry rifleman should carry only the items necessary to complete the immediate mission at hand. The load an infantry rifleman carries should not include any other item that can be carried another way. Because the type of mission, terrain, and environmental conditions will influence the clothing and individual equipment requirements, the unit commander may prescribe to the infantry rifleman the essential items. The prime purpose of the fighting and existence loads concept is to lighten an infantry rifleman's load.

The typical individual fighting load is made up of essential items of clothing, individual equipment, small arms, and small arms ammunition that are carried by, and are essential to, the effectiveness of the combat infantry rifleman and the accomplishment of the immediate mission of the unit when the infantry rifleman is on foot. Normally these items are carried on the individual equipment belt and individual equipment belt suspenders.

The typical individual existence load consists of items other than those in the individual fighting load which are required to sustain or protect the infantry rifleman, which may be necessary for the infantry rifleman's increased personal and environmental protection, and which the infantry rifleman normally would not carry. When possible, the individual existence load items are transported by means other than man-carry. Otherwise both the fighting and existence loads are carried by the infantry rifleman. Individual existence load items are usually carried in the field pack.

Fighting load components

The ALICE system fighting load comprises the following components:

Belt, Individual Equipment - The individual equipment belt is constructed of Army Shade 7 olive drab nylon webbing with black chemical finish adjusting buckles, keepers, and a belt buckle. The medium size individual equipment belt (NSN 8465-00-001-6488) is for soldiers with waists measuring under 30 inches (76 cm) and size large (NSN 8465-00-001-6487) is for those with waists measuring 30 inches (76 cm) or over. The individual equipment belt is adjusted from each end by means of clamp-type buckles which slide on the individual equipment belt when open. The individual equipment items are attached by interlocking belt-strap keepers or are hooked through eyelets along the bottom of the individual equipment belt. The eyelets along the top of the individual equipment belt are for attaching the individual equipment belt suspenders.

In 1981 the new Belt, Individual Equipment, LC-2 is introduced with the green plastic quick-release buckle and is assigned the National Stock Number 8465-01-120-0674 (medium) and 8465-01-120-0675 (large).

Carrier, Entrenching Tool - The Entrenching tool carrier is molded of EVA and the top flap is secured by means of two metal snap fasteners. It attaches to the individual equipment belt by means of two belt-strap keepers with interlocking slides. The Entrenching tool carrier is designed to accommodate the lightweight collapsible Entrenching Tool, Hand (NSN 5120-00-878-5932).

Case, Field First Aid Dressing - The field first aid dressing case is constructed of Army Shade 106 olive green water repellent treated 7.25 ounces (206 g) nylon duck. It is 8 12 inches (22 cm) long with flap open; approximately 4 12 inches (11 cm) wide, and forms a 4 inches (10 cm) deep pocket. It has a metal snap-type fastener closure and is attached to the individual equipment belt or individual equipment belt suspenders by a belt-strap keeper with interlocking slide. The field first aid dressing case is designed to accommodate either the Dressing, First Aid, Field (NSN 6510-00-159-4883) or the Compass, Magnetic, Unmounted (NSN 6605-00-151-5337).

Case, Small Arms Ammunition - The small arms ammunition case is designed to accommodate three 30-round Magazine, Cartridge (NSN 1005-00-921-5004) used with the Rifle, 5.56 Millimeter, M16A1. It is constructed of nylon duck and webbing with polyester sheet stiffeners in the front, rear and lid of the small arms ammunition case. Each cartridge magazine is held in place by means of 34-inch (1.9 cm) wide webbing spacers which cross the top of the small arms ammunition case. The lid is closed by means of a plastic latch. Grenade carrying pockets are located on each side of the small arms ammunition case which are secured by means of a nylon web strap and metal snap fastener. A tab with a metal eyelet is located at the top back of the small arms ammunition case to which the individual equipment belt suspenders are attached. The small arms ammunition case is attached to the individual equipment belt by belt-strap keepers with interlocking slides.

Cover, Water Canteen - The water canteen cover is fabricated of nylon cloth and webbing and acrylic pile liner material. The two-flap closure is secured by means of metal snap fasteners. There is a small pocket on the front of the cover for carrying water purification tablets. The lid of this small pocket is secured by means of hook and pile fastener tape. The cover attaches to the individual equipment belt by means of two belt-strap keepers with interlocking slides. The water canteen cover is designed to accommodate the Canteen, Water (NSN 8465-00-889-3477). In 1975, the LC-1 designation for the water canteen cover is changed to LC-2 due to some minor design changes. The National Stock Number remains the same.

Suspenders, Individual Equipment Belt - The individual equipment belt suspenders are Y shaped with three adjusting straps, but four points of attachment to the individual equipment belt and small arms ammunition cases. The shoulder straps are padded with spacer cloth. Each shoulder strap has a web loop and a non-slip buckle on each of the straps in the front and one at the back through which the adjusting straps pass. There are rectangular wire loops located between the web loops and the buckles on the front of the straps. The 1-inch (2.5 cm) wide adjusting straps have side-retaining snap hooks at one end. The back adjusting strap has an inverted V of which each end has a side-retaining snaphook. Each of the adjusting straps has a loop around it made of 1-inch (2.5 cm) elastic material. In 1991, the individual equipment belt suspenders are redesignated LC-2 with no apparent modifications.

Existence load components

The ALICE system existence load comprises the following components:

Field Pack (medium) - The field pack is made of water repellent treated nylon duck and webbing, spacer fabric, and metal hardware. It can be used with or without the LC-1 Field Pack Frame. The main compartment closes by means of a drawstring secured by a plastic cord clamp. A radio pocket is located against the back on the inside. The size of the pack may be decreased for smaller loads by means of three para-cord ties, stitched to the inside bottom of the pack, and three metal D-rings located directly below the internal radio pocket. Three pockets on the outside, with strap and buckle adjustable closures and with snap fasteners for quick access, are provided for miscellaneous items. The top flap has a pocket with a hook and pile fastener tape sealed closure. Equipment hangers are located above each outside pocket and on each side. Drainage eyelets are provided in the bottom of the main compartment and the outside pockets. An envelope pocket is located at the top, back of the pack and padded with spacer cloth, into which the field pack frame is inserted when the field pack is used on the field pack frame. Buckles and straps at each side near the bottom are used for anchoring the field pack to the field pack frame. Two rectangular wire loops located at the top back of the field pack and D rings on each side at the bottom of the field pack are used to provide shoulder strap attachment when the field pack is carried without the field pack frame. A waterproof bag is supplied for the main compartment and each of the three outside pockets for keeping equipment dry.

Field Pack (large) - The construction and materials in the large field pack are similar to the medium field pack with the differences being: it is much larger in size; the center outside pocket is larger than the other two main outside pockets; and the addition of three small outside pockets above the larger pockets. The large field pack MUST be used with the LC-1 Field Pack Frame.

Frame, Field Pack - The field pack frame is used as a mount for either the medium field pack or the large field pack. The frame, when requisitioned, comes with all straps. The frame is of aluminum construction.

Shelf, Cargo Support - The cargo support shelf is used to support bulky loads such as water, gasoline, and ammunition cans, field rations, and radios. The shelf is of aluminum construction.

In 1977 the following existence load equipment items are introduced as replacements after modifications due to defects in the original equipment's design:

See also

References

  1. 1 2 3 4 5 Metzger, Eldon (July 1975). History Of The Development Of The LINCLOE Load-Carrying Equipment (PDF). Natick, MA: U.S. Army Materiel Command. Retrieved 2014-09-12.
  2. US Army Combat Developments Agency: A Study To Reduce The Load Of The Infantry Combat Soldier, 17 October 1962
  3. US Army Combat Developments Command: A Study To Conserve Energy Of The Combat Infantryman, 5 February 1964
  4. Department Of The Army Approved Qualitative Material Requirement For A System Of Lightweight Individual Combat Clothing And Equipment, 1 September 1965
  5. Training Circular TC 10-8, United States Army: The Lightweight Rucksack: Nylon OG106 (With Riveted Frame), September 1967
  6. Minutes: Engineering Concept Review For Load-Carrying Equipment And Rucksack, 15 March 1967
  7. Memorandum For Record, AJ11S-1: Minutes Of Special Infantry Team Meeting, 19 July 1969
  8. Letter, CDCMR-O, Headquarters, USACDC: LINCLOE Load-Carrying Equipment System, 15 April 1970
  9. Letter, USANLABS: Load-Carrying Equipment, 16 June 1972
  10. Final Report: Final Report, Expanded Service Test Of Load-Carrying Equipment, Lightweight (LINCLOE), September 1972
  11. Memorandum For Record, USANLABS: Report Of Travel On 31 October 1972 To Fort Benning, GA, 9 November 1972
  12. Letter Report, STEBC-TE-F, USAIB: Letter Report Of Retest Of Load-Carrying Equipment, Lightweight, LINCLOE, 22 December 1972
  13. Minutes: Development Acceptance Review, Load-Carrying System, 17 January 1973
  14. Rottman, Gordon (26 January 1989). U.S. Army Combat Equipments 1910-88. Osprey Publishing. ISBN 978-0850458428. Retrieved 2014-09-12. (subscription required (help)).
  15. Janson, Bill (24 December 2011). "The Alice Pack is still around … as it should be". Kit Up!. Retrieved 2014-09-12.

External links

Media related to All-purpose Lightweight Individual Carrying Equipment at Wikimedia Commons

This article is issued from Wikipedia - version of the 11/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.