Aeromagnetic survey

An aeromagnetic survey is a common type of geophysical survey carried out using a magnetometer aboard or towed behind an aircraft. The principle is similar to a magnetic survey carried out with a hand-held magnetometer, but allows much larger areas of the Earth's surface to be covered quickly for regional reconnaissance. The aircraft typically flies in a grid-like pattern with height and line spacing determining the resolution of the data (and cost of the survey per unit area).

Method

As the aircraft flies, the magnetometer measures and records the total intensity of the magnetic field at the sensor, which is a combination of the desired magnetic field generated in the Earth as well as tiny variations due to the temporal effects of the constantly varying solar wind and the magnetic field of the survey aircraft. By subtracting the solar, regional, and aircraft effects, the resulting aeromagnetic map shows the spatial distribution and relative abundance of magnetic minerals (most commonly the iron oxide mineral magnetite) in the upper levels of the Earth's crust. Because different rock types differ in their content of magnetic minerals, the magnetic map allows a visualization of the geological structure of the upper crust in the subsurface, particularly the spatial geometry of bodies of rock and the presence of faults and folds. This is particularly useful where bedrock is obscured by surface sand, soil or water. Aeromagnetic data was once presented as contour plots, but now is more commonly expressed as thematic (colored) and shaded computer generated pseudo-topography images. The apparent hills, ridges and valleys are referred to as aeromagnetic anomalies. A geophysicist can use mathematical modeling to infer the shape, depth and properties of the rock bodies responsible for the anomalies.

Airplanes are normally used for high-level reconnaissance surveys in gentle terrain, and helicopters are used in mountainous terrain or where more detail is required. UAVs can also be used in aeromagnetic survey work.[1]

Uses

This helicopter is equipped with a magnetometer array. It flies six feet above ground at speeds of 30 to 40 mph.

Aeromagnetic surveys are widely used to aid in the production of geological maps and are also commonly used during mineral exploration and petroleum exploration. Some mineral deposits are associated with an increase or decrease in the abundance of magnetic minerals, and occasionally the sought after commodity may itself be magnetic (e.g. iron ore deposits), but often the elucidation of the subsurface structure of the upper crust is the most valuable contribution of the aeromagnetic data.

Aeromagnetic surveys were performed in World War II to detect submarines using a Magnetic Anomaly Detector attached to an aircraft. Aeromagnetic surveys are also used to perform reconnaissance mapping of unexploded ordnance (UXO). The aircraft is typically a helicopter, as the sensors must be close to the ground (relative to mineral exploration) to be effective. Electromagnetic methods are also used for this purpose.

Eurocopter AS350 geophysical survey helicopter equipped with an aeromagnetic survey system.

See also

References

  1. "InView Overview". Barnard Microsystems.com. Retrieved 2012-03-31.
  • Burger RH, Sheehan AF, Jones CH (2006) Introduction to Applied Geophysics. Published by W. W. Norton, 600 p., ISBN 0-393-92637-0 / ISBN 978-0-393-92637-8.
This article is issued from Wikipedia - version of the 11/21/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.