Wings of Freedom Phoenix 103

Phoenix 103
Role Amateur-built aircraft
National origin United States
Manufacturer Wings of Freedom
Status In production (2012)
Unit cost
US$9,999 (2011)
Developed from Aero-Works Aerolite 103

The Wings of Freedom Phoenix 103 is an American amateur-built ultralight aircraft, produced by Wings of Freedom of Hubbard, Ohio. The aircraft is supplied as a kit for amateur construction.[1]

Design and development

The Phoenix 103 is based upon the discontinued Aero-Works Aerolite 103, for which Wings of Freedom has been providing parts. The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 254 lb (115 kg). The Phoenix 103 features a strut-braced high-wing, a single-seat open cockpit with a windshield, fixed tricycle landing gear and a single engine in pusher configuration.[1]

The aircraft is made from aluminum tubing, with its flying surfaces covered in Dacron sailcloth. Its 26.8 ft (8.2 m) span wing has an area of 124 sq ft (11.5 m2). The aircraft's recommended engine power range is 28 to 50 hp (21 to 37 kW) and standard engines used include the 50 hp (37 kW) Hirth F-23 two-stroke powerplant. Construction time from the supplied kit is estimated as 100 hours.[1]

Operational history

By December 2011 the manufacturer reported that ten examples had been completed and flown.[1]

Specifications (Phoenix 103)

Data from Kitplanes[1]

General characteristics

Performance

References

  1. 1 2 3 4 5 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 76. Belvoir Publications. ISSN 0891-1851

External links

This article is issued from Wikipedia - version of the 2/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.