Wax motor

A wax motor is a linear actuator device that converts thermal energy into mechanical energy by exploiting the phase-change behaviour of waxes. During melting, wax typically expands in volume by 5% to 20% (Freund 1982).

A wide range of waxes can be used in wax motors, ranging from highly refined hydrocarbons to waxes extracted from vegetable matter. Specific examples include paraffin waxes in the straight-chain n-alkanes series. These melt and solidify over a well-defined and narrow temperature range.

Design

The principal components of a wax motor are:

When the heat source is energized, the wax block is heated and it expands, driving the plunger outwards by volume displacement. When the heat source is removed, the wax block contracts as it cools and the wax solidifies. For the plunger to withdraw, a biasing force is usually required to overcome the mechanical resistance of seals that contain the liquid wax. The biasing force is typically 20% to 30% of the operating force and often provided by a mechanical spring or gravity-fed dead weight applied externally into the wax motor (Duerig 1990, p. 214).

Depending on the particular application, wax motors potentially have advantages over magnetic solenoids:

Applications

Aerospace Controls

Wax motors are used heavily in the aerospace industry where they are utilized to control fuel, hydraulic, and other oils critical to safe flight today in modern airplanes.

Mixing Valves - HVAC

Wax motors are contained inside "self actuating" thermostatic mixing valves, where the wax motor senses thermal change and responds accordingly to yield a desired mixed fluid temperature.

Laundry washing machines

Some front load washing machines use wax motors to engage the door lock assembly. When a cycle is started, a wax motor is actuated pushing a pin outward and locking the door.

Hot water heating systems

Wax motors are also commonly used to drive zone valves in hydronic (hot water) heating systems.

Dishwashers

They are used in many dishwashers to release the detergent dispenser door latch. The wax motor acts like a solenoid when activated by the dishwasher's timer or control, and the piston operates the mechanism which then releases the catch for the dispenser door. They are also used to control the exhaust vent for the drying cycle.

Greenhouse vents

Wax motors are widely used to operate the temperature regulating vents of greenhouses.

In this application, as the ambient temperature within the greenhouse increases, the wax melts, activating the plunger and opening the vents. When the greenhouse temperature has cooled sufficiently, the wax cools and solidifies, allowing the vents to close again.[note 1]

See also

Notes

  1. 'Solar Powered Vent Control Application Guide' http://www.charleysgreenhouse.com/index.cfm?page=_vent_application_tips Accessdate=13 July 2013

References

External links

This article is issued from Wikipedia - version of the 10/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.