Long Josephson junction

In superconductivity, a long Josephson junction (LJJ) is a Josephson junction which has one or more dimensions longer than the Josephson penetration depth . This definition is not strict.

In terms of underlying model a short Josephson junction is characterized by the Josephson phase , which is only a function of time, but not of coordinates i.e. the Josephson junction is assumed to be point-like in space. In contrast, in a long Josephson junction the Josephson phase can be a function of one or two spatial coordinates, i.e., or .

Simple model: the sine-Gordon equation

The simplest and the most frequently used model which describes the dynamics of the Josephson phase in LJJ is the so-called perturbed sine-Gordon equation. For the case of 1D LJJ it looks like:

where subscripts and denote partial derivatives with respect to and , is the Josephson penetration depth, is the Josephson plasma frequency, is the so-called characteristic frequency and is the bias current density normalized to the critical current density . In the above equation, the r.h.s. is considered as perturbation.

Usually for theoretical studies one uses normalized sine-Gordon equation:

where spatial coordinate is normalized to the Josephson penetration depth and time is normalized to the inverse plasma frequency . The parameter is the dimensionless damping parameter ( is McCumber-Stewart parameter), and, finally, is a normalized bias current.

Important solutions

Here , and are the normalized coordinate, normalized time and normalized velocity. The physical velocity is normalized to the so-called Swihart velocity , which represent a typical unit of velocity and equal to the unit of space divided by unit of time .

References

  1. M. Tinkham, Introduction to superconductivity, 2nd ed., Dover New York (1996).
This article is issued from Wikipedia - version of the 3/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.