Ellipse Zenith

Zenith
Role Hang glider
National origin France
Manufacturer La société Ellipse
Status Production completed
Unit cost
3506 (2003)

The Ellipse Zenith is a French high-wing, single-place, hang glider that was designed and produced by La société Ellipse of Étuz.[1]

Design and development

The Zenith was designed as a competition hang glider and was built in only one size. With structural reinforcement it is also suitable for adding a motorized harness for powered hang glider operations.[1]

The Zenith is made from aluminum tubing, with the wing covered in Dacron sailcloth. Its 11 m (36.1 ft) span wing is cable braced from a single kingpost. The nose angle is 132° and the aspect ratio is 7.7:1.[1]

Variants

Zenith 150
Sole unpowered model with a wing area of 15.3 m2 (165 sq ft), wing span of 11 m (36.1 ft), aspect ratio of 7.7:1 and a pilot hook-in weight range of 80 to 120 kg (176 to 265 lb).[1]
Zenith 150 Moteur
Powered model with structural reinforcement and a wing area of 15.3 m2 (165 sq ft), wing span of 11 m (36.1 ft), aspect ratio of 7.7:1 and a pilot hook-in weight range of 80 to 120 kg (176 to 265 lb).[1]

Specifications (Zenith 150)

Data from Bertrand[1]

General characteristics


References

  1. 1 2 3 4 5 6 Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 43. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.