Drilling jumbo

An Atlas-Copco Boomer
historical 6-armed air-powered drilling jumbo on rails
small 2-armed air-powered drilling jumbo

A Drilling jumbo or drill jumbo is a rock drilling machine.

Use

Drilling jumbos are usually used in underground mining, if mining is done by drilling and blasting. They are also used in tunnelling, if rock hardeness prevents use of tunnelling machines.

Description

A drilling jumbo consists of one, two or three rock drill carriages, sometimes a platform, which the miner stands on to load the holes with explosives, clear the face of the tunnel or else. The carriages are bolted onto the chassis, which supports also the miners cabin and of course the engine. Modern drilling jumbos are relatively large, there are however smaller ones for use in cramped conditions. Whereas modern jumbos usually fitted with rubber tyres and diesel powered, there are also exist variants with steel wheels, to ride on rails and even single carriaged sled-mounted ones. Electric power is also common, historical jumbos were powered by compressed air. Electricity and compressed air produce of course no exhaust gases, which is preferable if work is done in smaller tunnels where good ventilation is difficult.

Wikimedia Commons has media related to Drilling jumbos.


This article is issued from Wikipedia - version of the 1/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.